? ? The new stainless steel roller microfilter is specially developed for freshwater aquaculture. It can adapt to high flow water treatment requirements. When installed, it comes with a buffer pool. The microfilter is mounted on the inlet opening of the buffer pool. The inlet opening of the buffer pool should be closely fitted to the inlet of the microfilter. Prevent leakage of suspended matter in the water.
? ? Stainless steel roller microfilter adopts automatic cleaning design. Water enters the drum from the front through an opening in the buffer pool, and the dirt is captured by a screen on the drum. When the amount of dirt on the screen is increasing, the filtration capacity of the screen decreases. At this point, the water level in the rear buffer pool is constantly being pumped away and falling. When the water level sensor senses that the water level has dropped, it starts the drum motor and the high pressure cleaning pump through the electrical signal. Both begin to work. The drum rotates under the drive of the motor, and the high-pressure nozzle connected with the high-pressure cleaning pump spews out high-pressure water mist. Wash the dirt off the inner wall of the roller. It falls into the collecting tank inside the drum. It is then discharged through the sewage pipe connected on the collecting tank. So that the micro - filter machine to achieve automatic filtration of sewage in water.
? ? Stainless steel drum microfilter is made of 304 stainless steel. It's stronger than plastic, so you can make it bigger. More processing power.
? ? The strainer of roller microfilter adopts 316L stainless steel strainer with good corrosion resistance. And easy to replace.
? ? Design flow rate: 250T/H
? ? Material: 304 stainless steel (filter screen is 316L stainless steel)
? ? Filtration accuracy: 80 microns
? ? Backflush power: not more than 1KW
Contact: Jack Lee
Add: Guangdong guangzhou